Regions experiencing heavy rainfall should always be on the lookout for potential problems. One day, they may notice water stains creeping down on the walls, suggesting a potential leak that could lead to serious structural damage if left unaddressed.
In these cases, roof flashing becomes essential for protecting your building in Portland. If you want to learn more about roof flashing, this article will discuss it in detail, showing its role in maintaining a roof’s integrity and longevity by directing water away from vulnerable areas and preventing leaks.
What Is Flashing on a Roof?
Roof flashing is a thin material, typically made of metal such as aluminum or galvanized steel, used in construction to direct water away from critical areas of a roof. It is installed at joints, seams, and other vulnerable points on the roof surface, such as around chimneys, skylights, and vents, to prevent water from seeping into the structure.
By creating a watertight barrier, flashing maintains the roof’s integrity and extends its lifespan by stopping leaks and subsequent water damage.
Why Is Roof Flashing Necessary?
- Prevents Water Damage. By directing water away from joints and vulnerable areas, roof flashing prevents leaks that can cause severe water damage within the building. This protection is vital for maintaining the structural integrity of the roof and the building.
- Enhances Roof Durability. Flashing acts as a protective barrier against harsh weather conditions, reducing wear and tear on roofing materials. This extends the roof’s lifespan by offering sustained protection against elements like rain, snow, and wind.
- Protects Interior Structures. By effectively diverting water away from the roof, flashing helps safeguard interior elements such as ceilings and walls. This avoids issues like water stains, mold growth, and structural deterioration.
- Improves Energy Efficiency. Properly installed flashing can seal the roof against drafts, providing better insulation and energy efficiency. Keeping indoor temperatures stable also reduces heating and cooling costs for property owners in Portland, Oregon.
- Increases Property Value. A well-maintained roof with functional flashing can improve a property’s value. Prospective buyers often see features that indicate low maintenance needs and reliable protection as a plus, resulting in higher marketability and resale value.
- Minimizes Maintenance Costs. Roof flashing reduces repair and maintenance frequency by preventing leaks and other forms of damage. This lowers long-term costs for property owners by avoiding expensive and extensive repair work.
- Aesthetic Integration. Flashing is designed to blend with roofing materials and maintain a property’s aesthetic integrity. It guarantees that protective elements do not detract from the visual appeal of a well-designed roof.
What Is the Problem With Roof Flashing?
The main problem with roof flashing occurs when it is improperly installed, damaged, or deteriorated, leading to leaks. Over time, corrosion, weather-related damage, thermal expansion and contraction, and sealant degradation can compromise the flashing’s effectiveness.
When flashing fails to provide a watertight seal at roof joints, seams, and around protrusions like chimneys and vents, water can enter the roofing structure, possibly causing severe water damage, mold growth, or structural issues. Fortunately, regular maintenance and timely repair can avoid these problems.
Types of Roof Flashing and Their Uses
Understanding what the flashing on a roof is and its various types is important, as each common type serves a specific purpose and is suited for various applications. Below, you can find the various types of roof flashing and their unique functions in keeping your building safe and dry:
Step Flashing
This type of flashing is used where a roof meets a vertical surface. It is composed of small, rectangular pieces of flashing material that are layered and woven into shingles. Each “step” redirects water away from the wall onto the shingles below. The overlapping installation can effectively divert water away, preventing leaks and protecting the roof and the adjoining wall from moisture damage.
Valley Flashing
Roof valleys, where two sloping roof planes intersect, are highly susceptible to water accumulation. Valley flashing, which is usually made of a long metal strip or other waterproof material, is installed along these intersections.
It channels rainwater down the roof slope and into the gutter system. Correct placement and installation are vital for effective water diversion, particularly during heavy rainfall when water flow is concentrated in these areas.
Chimney Flashing
Chimneys protrude from the roof, creating potential entry points for water. Chimney flashing consists of two parts: base flashing and counter flashing. Base flashing sits in the trough that forms where the chimney meets the roof, while counter-flashing is embedded into the chimney, overlapping the base flashing.
Together, they create a watertight seal that prevents water from seeping down the chimney surface and into the home.
Drip Edge Flashing
Drip edge flashing, installed along the roof penetrations and edges, is generally made of thin metal strips. Its main purpose is to guide water away from the fascia boards and into the gutter system, protecting the underlying roof components from rot and water damage. Additionally, it reinforces the roof edges, preventing wind uplift and keeping shingles secure.
Skylight Flashing
Skylights require specialized flashing to prevent roof leaks where they are installed. This flashing typically consists of a combination of step flashing and continuous flashing. It creates a waterproof barrier around the skylight, ensuring that water flows away instead of seeping in. Proper installation is important to maintain the seal and keep the interior free from water intrusion.
Vent Pipe Flashing
Roof vents and pipes are another common source of leaks. Vent pipe flashing surrounds these protrusions, creating a tight seal. Typically made of flexible boot-like materials, often with a metal ring, it adapts to different pipe sizes and prevents water from entering the roof structure around these openings.
Step-By-Step Process of Installing Roof Flashing
The installation of roof flashing is never a simple job, as it requires you to follow specific steps to ensure it functions as intended. If you’re wondering how professionals in Portland install roof flashing, below are the several steps included in a standard installation job:
1. Prepare the Area
Before the installation, clean the area of debris. Remove any old flashing, roofing cement, or damaged shingles that may obstruct the new installation. This will allow the new flashing to fit amply and create a barrier against water. It’s also important to check the roof deck for signs of rot or damage. If necessary, you should also repair these areas to provide a stable base for the new flashing.
2. Select the Right Materials
Choose a flashing material that suits the roofing system’s requirements and climate. Common sheet metals include aluminum, galvanized steel, and copper, each with distinct levels of durability and ease of installation. Gather also other supplies and tools like roofing nails, roofing cement, and a caulking gun to seal seams and edges.
3. Install the Drip Edge Flashing
Start by installing the drip edge flashing along the roof’s eaves. Position the flashing to hang over the edge slightly to ensure water is directed into the gutters. Secure it with roofing nails, spacing them about 12 inches apart, and apply roofing cement along the seams and nail heads for added protection.
4. Apply Valley Flashing
If the roof includes valleys, install a continuous piece of flashing along the valley. Make sure it extends slightly beyond the edge of the shingles to direct water into the gutter system. Fasten it with nails at the edges and use roofing cement to seal along the perimeter and the overlaps of the flashing sections to prevent water from seeping through.
5. Set Up Step Flashing
Step flashing is installed where the roof meets vertical walls, such as a chimney or dormer. Beginning from the bottom, lay the first piece of step flashing over the shingle and against the wall, then lay the next shingle over it. Continue this process, alternating between shingles and flashing, weaving them together.
6. Install Chimney Flashing
For chimneys, install base flashing at the lower side first, then secure the step flashing along the sides. Finally, install counter flashing by embedding it into a groove cut into the chimney mortar, overlapping the base and step flashing pieces. Use roofing cement or a specialized flashing caulk to seal all joints and edges to prevent the seams from acquiring water damage.
7. Check Vent Pipe Flashing
For vent pipes and other protrusions, slip a boot-style flashing over the pipe and underneath the surrounding shingles. Cover the top edge of the flashing with a shingle while the lower shingle overlaps the base to guide water over the top. Use roofing sealant around the base of the pipe to secure it and prevent leaks.
8. Final Inspection and Sealing
Once all flashing is installed, perform a final inspection to check if all edges, seams, and overlaps are properly sealed. Use roofing cement or caulk to fill visible gaps, nail heads, or potential weak points, allowing water infiltration. This last step guarantees long-term protection and durability of the roof.
Common Problems to Encounter With Roof Flashing
Like most components within your building, a roof flashing will also encounter its fair share of problems moving forward. Whether you’ve chosen the best materials or hired the most skilled roofing contractor, it’s normal to expect some roof flashing issues mentioned below:
- Corrosion and Rust. Over time, metal flashing, especially if not galvanized or adequately coated, can corrode or rust due to constant moisture exposure. The rust and corrosion weaken the flashing, potentially creating gaps that will cause water to seep into the roof structure.
- Improper Installation. Incorrectly installed flashing can lead to water leakage. Common installation errors include improper placement, inadequate overlap of flashing pieces, or insufficient sealing. Such mistakes compromise the watertight seal intended to protect vulnerable areas of the roof.
- Weather-Related Damage. Severe weather conditions like strong winds, hail, or heavy snowfall can damage roof flashing. Winds can dislodge loose flashing, while hail and heavy snow can bend or dent flashing materials, reducing effectiveness.
- Thermal Expansion and Contraction. Fluctuating temperatures can cause metal flashing to expand and contract. Over time, this thermal movement may loosen fasteners or create gaps, disrupting the integrity of the watertight seal and leading to annoying leaks.
- Sealant Degradation. Most flashing installations include sealants for a tight fit. However, sunlight exposure, temperature changes, and moisture can crack or degrade sealants over time. This breakdown can create openings that allow water ingress.
- Improper Upkeep. Neglecting regular roof inspections and maintenance can allow small flashing issues to go unnoticed and worsen. Accumulated debris or unnoticed small gaps can create water damage and costly repairs if not fixed at once.
- Age and Wear. Like any roofing component, flashing materials have a finite lifespan. Over time, wear and tear can lead to thinning or cracking, making them less effective at stopping water intrusion as they age.
- Animal Damage. Animals such as birds or rodents sometimes damage flashing while searching for nesting materials or shelter. This can create openings where water can infiltrate the roof structure.
Care and Maintenance Tips for Roof Flashing
Now that you know what flashing on a roof is, the next step is learning how to care for and maintain it. Regular upkeep not only extends the life of the flashing but also maintains your roofing’s overall integrity.
Here’s how you can take care of your roof flashing:
- Regular Inspections. Inspect your roof flashing at least twice yearly, ideally in the spring and fall. Look for signs of damage or deterioration, such as cracks, corrosion, or loose flashing. Detecting potential issues early on can prevent them from turning into costly roof repairs.
- Clear Debris. Ensure leaves, branches, and other debris are regularly cleared from the roof, especially from valleys and around chimneys. Accumulated debris can trap moisture against the flashing, accelerating corrosion and increasing the risk of leaks.
- Check Sealants. Inspect the sealants around the flashing regularly for any signs of deterioration, such as cracking or peeling. Reapply sealant when necessary to maintain a watertight seal, especially after extreme weather conditions.
- Monitor Weather-Related Changes. After severe weather events, assess your roof flashing for any damage or displacement. Immediate repairs can avoid further water infiltration or damage.
- Handle Corrosion Quickly. If you notice signs of corrosion on metal flashing, address it right away to stop it from spreading. Light rust spots can often be treated with a rust-inhibiting primer or paint for metal surfaces.
- Repair or Replace Damaged Flashing. If flashing is visibly damaged, loose, or missing, a roof replacement or repair is needed to prevent leaks. Professional assessment may be necessary to handle the repairs properly.
- Trim Overhanging Branches. Keep tree branches trimmed away from the roof to avert scraping the flashing during high winds or storms. This reduces the risk of physical damage and limits the accumulation of debris.
- Hire Professional Roofers. For comprehensive inspections and repairs, consider hiring professional roofing services. Experts can identify and fix flashing issues more effectively, ensuring the long-term performance of your roofing system.
Protect Your Portland Property With Proper Roof Flashing by Hiring Armadas Exterior LLC Now!
If your building’s roof flashing needs some work, you can turn to Armadas Exterior LLC. With years of experience serving clients around Portland, our roofing professionals can inspect and install quality roofing systems. We only source high-grade materials, especially the flashing, to give clients a durable and long-lasting roof.
Call us if you have more questions about our roofing company or services in Portland, Oregon.